Set Home | Favorites | Microblogging | Chinese
- Home
- About Us
- News
- Products
- 1.Inductor Coil
- 2.Bobbin Coil
- 3.Air Coil
- 4.Self Bonded Inductance Coil
- 5.Miniature coil
- 6.Plastic Electronics Assembly
- 7.Induction Coil
- 8.Sensor Coil
- 9.Hearing aids coil
- 10.Amplifier coil
- 11.Power Switch Coil
- 12.Antenna RFID Coil
- 13.Trigger Flash Coil
- 14.Tag coil
- 15.Toy coil
- 16.Speaker voice Coil
- 17.Wireless Charger Coil
- 18.Solenoid valve coil
- 19.Motor coil
- 20.Tag Inductance Coil
- 21.Antenna Inductance Coil
- 22.Ignition coil
- 23.Hard Disk Driver coil
- 24.IR Cut Inductance Coil
- 25.Transformer Coil
- 26.Access Control RFID
- 27.Plastic
- Culture
- Download
- feedback
- Join us
- Contact Us
News
Tel:
+86-799-6652759+86-0769-83517380-806
Mobile:
eva dai +86-18979985376
Vincene +86-15818417261
Irene +86-18273713863
QQ:
eva dai 2741947282
Vincene 2928711977
Irene 3094368671
Your Location : Home > News200 polyesterimide overcoated with polyamide imide enamelled round copper wire _ inductance coil wire
This inductance coil wire is a kind of enameled Cu-Al round wire,thermal class 200, with ployesterimide resin as under-coating and polyamide-imide resin as over coating
| 主要性能 | Principal Property |
| 重量轻 | Lighter Weight |
| 直流电阻率稍大 | Slightly higher DC resistivitr |
| 电气性能同EIW/AIW-200 | Electric performances are same as EIW/AIW-200 |
| 生产规范 | Production specification |
| W1/AIW-1 0.05mm-5.00mm | W1/AIW-1 0.05mm-5.00mm |
| W1/AIW-2 0.05mm-5.00mm | W1/AIW-2 0.05mm-5.00mm |
| 产品标准 | Product Standard |
| 该产品可按下列标准生产 | The wire shall be manufactured according to following standards |
| SJ/T11223-2000,GB6109-1990 | SJ/T11223-2000,GB6109-1990 |
| 产品用途 | Product Usage |
| 消磁线圈 | Degaussing coil |
| 电感 | ICP coil |
| 耐高温变压器、耐热元件 | Refreactory transformer heat-resisting component |
| 电机 | Electric motor |
| 密封电机、制冷压缩机电机 |
Sealed motor,motor for refriger action compressor. |
